OBJECTIVE
To lay down the procedure for the routine and preventive maintenance Face Mask Packing Machine.
SCOPE
The procedure applies to the Face mask making machine located in the face mask manufacturing division.
RESPONSIBILITY
Officer/Executive Production: Shall be responsible for the daily maintenance of the machine.
Officer/ Executive Engineering: Shall be responsible for the preventive maintenance of Face Mask Packing Machine.
Manager-Maintenance: To ensure that the procedure is properly followed.
PROCEDURE
- The machine must be completely disconnected before maintenance.
- In order to extend the life of the machine, prevent failure and to achieve the best results, the daily maintenance of the machine is necessary.
- Operators themselves will be responsible for small amounts of maintenance work which must be carried out frequently following outline of these activities.
- The machine must be completely powered off before maintenance and the power plug removed from the wall socket.
- If the machine is not functioning properly or makes a lot of strange noises, turn off the power immediately and investigate the cause.
- Non-professionals are not allowed to perform large-scale maintenance work.
Standard Maintenance Periodic Table
|
Cycle
Time |
Maintain
Content |
|
Everyday |
Clean the machine
housing with a damp cloth to remove foreign material attached to the assembly. Do not use a high-voltage
cleaner. |
|
Each week |
Check the machine
for any noise. Check the
belt tension. Check the
quality of sealing and cutting. |
|
Each Month |
Check whether
the machine's individual detection switches are faulty and grease the gears. Check the set
temperature effectiveness. Check belt
for sign of wear. Check coding
rollers for ink quality. |
|
Quarterly |
Check wire
connection terminals. Check motor
terminals tightness. |
ABBREVIATIONS
SOP: Standard operating procedures
No. : Number
REVISION HISTORY
Nil
PEOPLE ALSO READ: SOP for Routine and Preventive Maintenance Facemask Making Machine
0 Comments