HOT POST

50/recent/ticker-posts

Header Ads Widget

SOP for Operation of Metal Detector

Objective
To lay down a procedure for the operation of metal detector and vertical deduster.

Scope
This procedure is applicable to the operation of metal detector and vertical deduster in the production area.

Responsibility
Officer to implement this procedure 
Department Head responsible for overall compliance to this procedure
Procedure

Machine setting
  • Ensure cleanliness of the area and equipment. Take line clearance from the QA person. Affix ‘UNDER PROCESS’ label duly filled and signed on the equipment and record all the observations in the equipment usage log sheet as per given SOP
  • Adjust the height of the vertical deduster such that its inlet chute positions slightly below the outlet chute of the compression machine by unlocking the locking knob and then lifting up / down the machine body and finally locking the locking knob.
  • Adjust the height of the metal detector by unlocking the locking knob.
  • Adjust the position of the metal detector coil by loosening the knob and then set the final position of the coil such that the metal detector’s inlet chute positions slightly below the outlet chute of tablet de-dusting vertical deduster and finally tighten the knob.

Operation
  • Turn ‘ON’ the compressed air supply to the vertical deduster.
  • Turn ‘ON’ the ON/OFF knob of the metal detector. A metal detector will turn ON.
  • Enter the password. Fill in the product detail such as product name, batch no. and save it.
  • Deduster will start. Feed some tablets in the inlet chute of de-duster. Set power and frequency such that tablets move upward without getting streaked.
  • Once every parameter is set. Operate the compression machine as per respective SOP.
  • On completion of the operation, disable the deduster and turn ‘OFF’ the ‘ON/OFF’ knob of the metal detector.
  • Affix ‘TO BE CLEANED’ label duly filled and signed on the machine and record all the observations in the equipment usage log sheet as per the given SOP.

ABBREVIATION:
QA: Quality Assurance
SOP: Standard Operating Procedure
RHS: Right-Hand Side
LHS: Left-Hand Side

ANNEXURE
Nil

REVISION HISTORY
Nil

Post a Comment

0 Comments

close