Objective
To lay down a procedure for Cleaning & Sanitation of Microbiology Lab / Sterility Room.
Scope
The procedure of this SOP shall be applicable for Microbiology Department of XYZ Ltd.
Responsibility
Microbiologist
Accountability
Q.C. Manager
Procedure
- After completing work in the Microbiology Laboratory, remove all used and unused material immediately.
- Clean the LAF bench and floor with a dry nylon brush to remove the materials; like vials, bungs, aluminum foils, papers, waste media traces and seals etc.
- Collect all the wastes in a plastic tray and transfer them to the dust bean.
- First mop the floors and the walls of a laboratory with the sanitation solution (Combatant DS) with the help of sterilized nylon cloth.
PEOPLE ALSO READ: SOP for Fumigation of Microbiology Laboratory
- Mope the working table with dry nylon cloth, then clean the table with the suitable detergent (Lanoline 0.5% solution) with the help of a nylon cloth.
- Finally, clean the table with a nylon cloth soaked in sterile water in order to remove the traces of detergents.
- Swab the working table with a suitable disinfectant (Combatant DS) and then by 70% IPA.
- All cleaning and sanitation activities shall be followed by the spraying disinfectant. This is applied for disinfection of the air of the area as well as the surface.
- Cleaning Schedule of Microbiology Lab.
|
|
Mon. |
Tue. |
Wed. |
Thu. |
Fri. |
Sat. |
|
Pre-Noon Mopping |
Savlon 2% |
Dettol 2% |
Fairgenol 2% |
B.K.C. 2% |
Savlon 2% |
Dettol 2% |
|
After Noon
Mopping |
Dettol 2% |
Savlon 2% |
B.K.C. 2% |
Fairgenol 2% |
Dettol 2% |
Savlon 2% |
Remarks
Spray the area with 70% IPA before 30 mts. of starting the work.
Spray with 2% Lysol daily after completion of work.
Fumigate the on every Saturday as per SOP No. CP/MBS/005
Abbreviations
SOP : Standard Operating Procedure
QC : Quality Control
QA : Quality Assurance
Annexure
Nil
Revision History
Nil
PEOPLE ALSO READ: SOP for Cleaning, Operation and Monitoring of Laminar Air Flow Unit
0 Comments