OBJECTIVE
To lay down procedure for cleaning of uniforms after use in production.
SCOPE
Procedure applies to all the uniforms, such as overalls, dust coats.
RESPONSIBILITY
The laundry Personnel: Is responsible for cleaning uniforms.
QA Officers: Are responsible for assuring that the uniforms issued are clean and do not pose any form of contamination.
PROCEDURE
- Collect the dirty uniforms from the Factory Laundry container in the change rooms every morning.
- Check all pockets for presence of pieces of materials e.g. keys, tools and other sharp objects.
- Fill the washing machine with water to the required level.
- Add required amount of detergent into the washing machine and mix thoroughly before soaking in uniforms.
- Switch on the washing machine and let it run for at least 1 hour.
- Switch off the washing machine and drain the soapy water.
- Add clean water for rinsing to required level and run the washing machine for 10 minutes
- Switch off the washing machine and drain the water.
- Remove the washed uniforms from the washing machine
- Load the washed uniforms into the drying machine to remove water.
- Switch on the drying machine and run for 1 hour.
- Switch off the drying machine and remove the uniforms.
- Press the dried uniforms using a pressing iron provided.
- Stack the pressed uniforms neatly on the shelves of the rack provided.
- Transfer the pressed uniforms to the Lockers in the change room.
REVISION HISTORY
Nil
PEOPLE ALSO READ: SOP for Cleaning and Sanitization of Drain Traps
0 Comments