Leaks are usually stopped by tightening or replacing a fitting. Be aware, however, that overtightened metal compression fittings can leak and plastic finger tights can wear out. If a fitting leak does not stop when the fitting is tightened a little, take the fitting apart and inspect for damage (e.g. distorted ferrule, or particles on the sealing surface); damaged fittings should be discarded.
Leaky Fittings
Leaks at Pump
PEOPLE ALSO READ: Hold Time Study for Cleaned FBD Bags
Injector Leaks
Column Leaks
Detector Leaks
PEOPLE ALSO READ: Troubleshooting Abnormal Pressure in HPLC
0 Comments