Hot Post

100/recent/ticker-posts

Header Ads Widget

SOP for Pass Box for Raw Materials

OBJECTIVE
To lay down a procedure for operation of pass box.

SCOPE
This procedure applies for Warehouse department in Pharmaceutical Manufacturing Facilities of XYZ Limited.

RESPONSIBILITY
The Warehouse staff is responsible for implementation of the process.
The Warehouse in-Charge and Production In-Charge or his designee has to ensure the compliance.

PROCEDURE
  • Switch on the main switch for the pass box.
  • The pass box has two doors on both the sides.
  • The pass box has Infrared light inside the pass box, make sure that light is on.
  • The pass box has two doors one in the raw material entry and other in the dispensing area.
  • The pass box generates magnetic flux and only one door of any one side opens at a time.
  • Open the door in the side of raw material store and pass the raw material drum and close the door.
  • Open the other door in the dispensing side and remove the raw material and close the door.
  • Make sure that no human should pass in the pass box as the infra red light is dangerous to body.
  • Pass the raw material from dispensing side and close the door.
  • Make sure the main switch for the pass box is on during dispensing.
  • Put off the main switch when the pass box is not in use.

ABBREVIATION(s)
Q.A : Quality Assurance
Q.C : Quality Control
SOP : Standard Operating Procedure
No. : Number
W.H : Warehouse

ANNEXURE(s)
Nil.

REVISION CARD
Nil.

Post a Comment

2 Comments

  1. Importance of Pass box in warehouse and production
    and
    How to make approved vendor list

    ReplyDelete
    Replies
    1. Importance of Pass Box

      https://www.pharmaceuticalsky.com/2021/09/importance-of-pass-box-in.html

      Delete

close