HOT POST

50/recent/ticker-posts

Header Ads Widget

SOP for Operating Procedure of Auto Dust Extractor

OBJECTIVE
To lay down a procedure for operation of auto dust extractor.

SCOPE
This procedure applies for production department in Pharmaceutical Manufacturing Facilities of XYZ Limited.

RESPONSIBILITY
The operator is responsible for implementation of the process.
The production In-Charge is responsible for the execution of the procedure.

PROCEDURE
  • Description: This equipment collects dust-contaminated air and passes through filter bag, which are tied to a hanger. All powder settles in two drawers, which are located at the bottom of the machine.
  • Fix one of the pipes to the dust extractor and position its nozzle half a meter away from the position of dust generation.
  • Open the back plate of the dust extractor and tie four filter bags and fix the back plate.
  • Push the drawers inside.
  • Switch on the machine to start extracting dust.
  • Once operation is complete, clean the machine as per SOP.
  • All the operation details shall be entered in the equipment usage log book.

REFERENCE(s)
SOP/SCP No.: Preparation, Approval and Control of Standard Cleaning Procedures for equipment.
Cleaning of auto dust extractor

ABBREVIATION(s)
Q.A : Quality Assurance
SOP : Standard Operating Procedure
No. : Number
P.D : Production

ANNEXURE(s)
Nil.

REVISION CARD
Nil.

Post a Comment

0 Comments

close