HOT POST

50/recent/ticker-posts

Header Ads Widget

SOP for Recording of Environmental Condition of Control Environmental Chambers

OBJECTIVE
To lay down a procedure for recording and verification of Environmental condition of control environmental chambers

SCOPE
The recording and verification of the environmental conditions of the environmental chambers located in stability section.

RESPONSIBILITY
Execution and Checking: Chemist and above of QC Department.

PROCEDURE
  • Stability Chambers is controlled by a “Microprocessor based temperature & Humidity controller” with digital display indicator.
  • Stability chamber shall be attached with the printer and data for temperature and humidity shall be acquired at each hour interval automatically
  • Take the printout of data each working day, Check, sign and date the print data.
  • File the data in the respective “Temperature and Humidity” record file
  • In case of any problem regarding the environment chamber operation the chemist will inform the engineering department. The engineering department will than try to rectify the problem or may contact the manufacture for support.
  • In case print is not coming out due some reason, temperature and humidity shall be recorded as per annexure-1

ABBREVIATION(s)
SOP : Standard operating procedure
Q.C : Quality Control

ANNEXURE(s)
Annexure No. 1 - Temperature & Humidity record



REVISION CARD
Nil

Post a Comment

0 Comments

close