HOT POST

50/recent/ticker-posts

Header Ads Widget

SOP for Preventive Maintenance of V-Blender

OBJECTIVE:
To provide a procedure for preventive maintenance of V-blender so as to obtain optimum performance of the machine and achieve the designed output as per the manufacturer’s design.

SCOPE:
It applies to general checks and cleaning of V-blender.

RESPONSIBILITY:
Maintenance Personnel: Inspect equipment components and take any corrective measures.
Operators: For keeping the machine clean after use.
Maintenance Manager: To ensure that the procedure is followed.

PROCEDURE:
  1. Clean the bearings (pillar bearings) with oil dipped cloth.
  2. Lubricate pillar bearings after cleaning with multipurpose grease once a month.
  3. Refill gear box oil with lubricant (SAE 90) every six months.
  4. Lubricate chain coupling with multipurpose grease every six months or when necessary.
  5. Clean electric contacts of the main supply, switches, controllers using suitable spray solution, for example, penetrating oil, once every year.
  6. Check silicon rubber seals, for wear, and replace if necessary.

REVISION HISTORY:
Nil

Post a Comment

0 Comments

close