HOT POST

50/recent/ticker-posts

Header Ads Widget

SOP for Cleaning Procedure for UV-Visible Spectrophotometer

OBJECTIVE
To lay down the procedure for cleaning of UV-Visible Spectrophotometer

SCOPE
This SOP shall be applicable for UV-Visible Spectrophotometer installed in Quality Control Laboratory at XYZ Limited

RESPONSIBILITY
Execution : Chemist and above-QC department


PROCEDURE
Frequency: After each use
  • After completion of the testing, remove cuvettes from the sample compartment.
  • Remove the test solution from the cuvette and wash with respective solvent in which solution is prepared.
  • Rinse with purified water properly to remove the traces of sample followed by methanol and wipe with tissue paper. Dry in air and keep it in a proper place.
  • Clean the sample compartment with a dry cloth to remove any foreign material if required.
  • Clean the outer surface of the instrument with Isopropyl alcohol and dry it with tissue paper when required.
  • Record the details of cleaning in log book of instrument as per current version of SOP.

ABBREVIATION(s)
SOP : Standard Operating Procedure
Q.C : Quality control

ANNEXURE(s)
Nil

REVISION HISTORY
Nil

Post a Comment

0 Comments

close