OBJECTIVE:
To lay down the cleaning procedure for S.S. Vessel and Utensils.
SCOPE:
This SCP shall be applicable for S.S. Vessel and Utensils used in Production area.
RESPONSIBILITY:
Execution: Operator
Checking: Pharmacist and Above
ACCOUNTABILITY:
HOD-Production
PROCEDURE:
- Initially remove all the residual material from the parts to be cleaned.
- Wash with Potable water & scrub if necessary.
- Wash with Potable water at least two times till the entire residue is washed off & then used 2.5 % “Antibacterial” solutions.
- Further clean the parts with hot water & finally rinse with purified Water.
- Wipe with 70% v/v solution of Isopropyl Alcohol (IPA).
- Allow the parts to dry.
- Affix “Cleaned” label & cover the parts adequately.
- Check the parts for cleanliness before use & re-clean if not used within 72 hours.
ABBREVIATIONS:
SCP : Standard Cleaning Procedure
IPA : Isopropyl Alcohol
PEOPLE ALSO READ: SOP for Cleaning of Dispensing Utensils
0 Comments