HOT POST

50/recent/ticker-posts

Header Ads Widget

SOP for Operating Procedure of Induction Sealing Machine

OBJECTIVE 
To lay down a procedure for operation of induction sealing machine. 

SCOPE 
This procedure applies for production department in Pharmaceutical Manufacturing Facilities Formulation division. 


RESPONSIBILITY 
  • The concerned operator is responsible for implementation of the process. 
  • The Production In-Charge is responsible for the execution and compliance of the procedure. 


PROCEDURE 
  • Ensure that the machine is clean and free from the traces of previous products. 
  • Ensure that line clearance is taken. 
  • Adjust the height of the sealing head plate by rotating the back knob; to the required height of the container, which is to be induction sealed. 
  • Adjust the heat timer to 3 to 5 seconds as per the requirement. 
  • Place the container locked with cap below the induction sealing head plate. 
  • Press START switch to start the sealing. 
  • Check the sealing quality along with approval of in process Quality Assurance person. 
  • Start the further activity. 
  • Maintain the proper labeling at each stage. 
  • All the operation details shall be entered in the equipment usage log book.

ABBREVIATION(s) 
Q.A - Quality Assurance 
SOP - Standard Operating Procedure 
No. - Number 
P.D - Production 

Post a Comment

2 Comments

  1. I really like your post. Thanks for sharing such a informative blog. Keep posting and upgrading our knowledge.

    Peel Strength Tester | Dart Impact Tester | Edge Crush Tester | Laboratory Testing Equipment & Instruments

    ReplyDelete
  2. Thanks for sharing this blog with us. It is very informative also I got some important points about Induction Sealing Machine

    ReplyDelete

close